Old Motifator threads are available in the Archive.
Farnell
Total Posts: 11
Joined 11-06-2014 status: Regular |
When I store new voices in Multi programe mode they revert back to the previous voices in the programe when I perform a programe change from my Hammond xk3.The xk3 is changing the voices rather than the programe,I have a manual but cannot find out how to alter this. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
You need to store the Multi after you change it. Are you doing this? |
Farnell
Total Posts: 11
Joined 11-06-2014 status: Regular |
Yes I changed a voice and pressed store-utility enter /are you sure [etc]and as soon as I execute a program change with the XK3 black keys and back to the multi program I have altered, the previous voice appears back in the multi program.When Motife is in Voice mode the XK3 changes the voices ok.
|
Derek Cook
Total Posts: 249
Joined 12-31-2005 status: Enthusiast |
Hi, sounds like the XK3 is send out patch changes which the parts in the multi are responding to. You should be able to turn off the reception of Bank Select and Program Change messages in all parts. Check out Page 85 of the manual and the RcvSw page in Multi Edit Mode. But you should be able to solve the issue by following the next para. To get the XK3 to switch to the multi, you need to send bank select and program change messages on the Basic Receive Channel (see page 91 of the manual). Page 97 of the manual shows the bank select numbers to select voice bannks, performances and multis. To select a multi you need a Bank Select MSB of 63, a bank select of 65, followed by the multi number. You’d have to consult your XK3 manual on how to set that up. Note, from memory (I don’t use the ES Rack much these days), you still need to manually put the Rack in Multi mode (mine was set up in Utility Mode to select Multi Mode on startup, as this is how I gigged with the rack), but using the Bank Select MSB/LSB commands stops the rack interpreting any program changes as being intended for changing the voices used in the parts HTH |
Farnell
Total Posts: 11
Joined 11-06-2014 status: Regular |
Thankyou for taking time to try and sort out my problem as soon as I get time to deal with it I will let you know how I get on,
Regards, Paul F. |
Farnell
Total Posts: 11
Joined 11-06-2014 status: Regular |
With regard to voice change within the programme in multi mode I solved the problem by making the receive channel number 2 in utility,I don’t know why this allowed the programme change.My set up is Roland rd 250 channel 2 Hammond XK3 channel 1 and Bass pedals channel 3 all running through a Kenton 3 in 2 out merge.One out goes to a Korg o3rw module which is set to Channel one in global and the other goes to Motif rack es set to channel 2.Both modules change programmes although set to different channels which are changed by hitting the black programme keys on the Hammond XK3 channel one. |