Can I set the editor to change voices while using a controller for the keyboard action?
Setup is such;
Panorama P4 connected with 5 pin to moxf for keyboard control.(Has eliminated noise associated with usb connection with audio out)see thread http://www.motifator.com/index.php/forum/viewthread/480085/
Reason 9 DAW
Midi set to midi in on moxf (not usb)
Cannot get sync settings to work on editor

I was just wanting to be able to switch voicings from the computer while using moxf for sounds.

Any hope?

Editor operation requires communication via USB ports. MIDI IN/OUT in Utility mode should be set to USB.

To use the external controller…
See MIDI channels and MIDI ports on page 54 of the MOXF Owner’s Manual, in particular the Port 3 and Port 1 information. The controller can remain connected to 5-pin MIDI-In, but in order for the MOXF tone generator to be controlled, Port 3 data has to be rerouted to Port 1 via your computer software. For the Editor, that means MIDI-In should be MOXF6/8-3 in Setup, while the MIDI-Out setting should remain at MOXF6/8-1. On the Editor main screen, Thru (at the lower right corner of the display) should be on.

If you have noise problems, they can be dealt with. Let us know.

Thanks, that did it.

lvsranch - 18 August 2018 08:49 PM

Thanks, that did it.

You’re welcome, glad to help.