Old Motifator threads are available in the Archive.
recorder
Total Posts: 24
Joined 01-31-2004 status: Regular |
Dear all,
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
These should work with the Classic Motif:
See the Motif Data List (attached)…
File Attachments
Motif (Classic) Data List.zip (File Size: 420KB - Downloads: 503) |
recorder
Total Posts: 24
Joined 01-31-2004 status: Regular |
5pinDIN, Thank you very much for your quick reply which is absolutely helpful. The Mode Change works!
Could you please help me out with one issue…
I hope you could give me a hint. cheers! Heiko |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re very welcome!
Â
Once the Motif is in any mode, it will remain there unless you send a different Mode Change message (or make a different selection at the Motif’s panel). I don’t know exactly what you’re doing, but if you access all your Voices, etc., via Master associations, then it should only be necessary to send the F0 43 10 6B 0A 00 01 04 F7 message once initially. From then on only the message to select the Master number would be required.
Â
Master number selection isn’t done with MSB/LSB/PC. It requires a Parameter Change SysEx message each time. (See the notes under the Bank Select table on page 46 of the Data List.)
The message to change Master number is…
Examples…
F0 43 10 6B 0A 00 00 24 F7 Â Â selects Master C05(037)
|
recorder
Total Posts: 24
Joined 01-31-2004 status: Regular |
Dear 5pinDIN,
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Bitte schön. I’m glad that did the trick for you. |