Hello,
Have a great day.. we have the default pattern(Guitar slide) when we use assignable function 1 in Arched top [(PRE09:035(C03)] voice.. I want the same pattern in Sitar2[PRE09:116(H04)] voice also..  I tried but couldn’t.. is it possible to change the default pattern in assignable function? if it is possible please reply..

if you can’t able to understand my question please reply to my post.. i will try another way to make you understand.. thank you..

I think I understand the question…

Element 5 in the “Arched Top” Voice has XA Control set to “AF1 on”. The Waveform in that Element is “Jazz Slide”. As far as I know, there is not a slide Waveform for Sitar. However, you should be able to create something similar by using a Sitar Waveform and proper Pitch Envelope Generator settings. See Pitch EG beginning on page 9 of the Synthesizer Parameter Manual (http://download.yamaha.com/file/60487).

Also, the “Arched Top” Controller Set Assignment for AF1 reduces the level for Elements 1 and 2 (E-level) when the AF1 button is pressed.

Thank you.. could you tell me how to update moxf8 firmware version 1.03 to 1.12?

Simply check the readme included in the update package. There are detailed instructions. (Next time perhaps better to start a new thread for a such different topic - just a suggestion.)

velmurugan - 28 October 2016 11:41 AM

Thank you.. could you tell me how to update moxf8 firmware version 1.03 to 1.12?

You’re welcome.

The v1.12 update file is here:
http://download.yamaha.com/file/68251
Unzip it, and as jozsihome said, the Readme file explains what to do. If anything is unclear, just ask.

i moved only .pgm file to pendrive and inserted into usb(to device) terminal of moxf8, held down the level meter button and power on the synthesiser as per instructions.. then i could see the msg “usb device connecting” but no msg showed about update.. please to help to solve this.. thank you..

From the OS updater Readme…
3. Connect the USB flash memory prepared in step 1 to the USB [TO DEVICE] terminal of the MOXF6/MOXF8. Hold down the [LEVEL] meter button, then power on the MOXF6/MOXF8.

4. After the message “Update MOXF 6/8. Press [REC]” appears, press [REC].

Hold down the [LEVEL] button until the message in step 4 appears, then release it and press [REC].

Got it.. thank you..

velmurugan - 29 October 2016 08:14 AM

Got it.. thank you..

You’re welcome.