Old Motifator threads are available in the Archive.
gpjoshua
Total Posts: 17
Joined 10-16-2016 status: Regular |
hello i am new to workstation so far i had been using arranger type. i am slowly learning various functions of moxf. when i switch over from user 1 bankb a01 to a02 sound is abruptly cutoff until you press the keys again. i did not experience such issue in psr s770. there previous user voices will be sustained until u press the key. can anyone help me? i play in church where we use various voices/performances.
thanks
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
What you’re experiencing is normal operation. Here is a way to avoid that:
|
gpjoshua
Total Posts: 17
Joined 10-16-2016 status: Regular |
Thanks Guru for the quick reply. I am basically comparing registration memory of PST S770 (1 lower and 2 upper parts voices) to MOXF performance (4 parts) So you say if we require switching without glitching, using the mixing program is the best option. but in the below example. if we channel part 7&8;to ch6, i am not getting any sound when we press part 7 or 8. this is again the problem while playing in the live.
PART 6 = Piano (CH.6) ‘Bb2’ and above *Insert Sw = on
Do you have any suggestions? Thanks |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You have created a split, with the upper part layered and the three Parts receiving on MIDI channel 6. Pressing button [6] causes the keyboard to transmit on channel 6, which will allow you to play the split/layer. Pressing [7] will cause the keyboard to transmit on channel 7, but there will be no sound because you have assigned Part 7 to receive on channel 6. A similar thing happens with button [8]. This is normal operation. What would you like to happen when pressing [7] or [8]? |
gpjoshua
Total Posts: 17
Joined 10-16-2016 status: Regular |
Thanks. it might be silly question. can we assign part 9,10,11 to midi receiving channel 7? if parts 6,7&8;is assigned to midi 6, i dont want to get mute if i accidentally press 7. otherwise if there are many layered parts, i need to remember which button should i not press. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You could set the Transmit Channel for Tracks 7 and 8 to “6”. That way, pressing [7] or [8] will result in accessing the same split/layer as when pressing [6]. See page 78 of the MOXF Reference Manual, OUT CH. However, I’m not sure that won’t result in other types of confusing operation. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Another possibility…
If you want layers to work with buttons in order, see my approach in this thread:
|