Old Motifator threads are available in the Archive.
rocknout
Total Posts: 10
Joined 01-21-2015 status: Newcomer |
When recording with the moXF to Cubase what should your utility - output setting be set at +6db or 0db?
I do notice that at even +6db the keyboard levels have to be turned up louder than my other keyboards after recording. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
If recording from the analog outs, all that matters is that you can get enough signal into the next device in the chain...for you it’s the mixer, for some people it’s the audio interface. If 0 is not giving you enough level or you’re hearing too much noise in the analog chain, then try +6. If recording digitally over USB, you want the level into the DAW to show about -12dB on the DAW meters. Use +6 if needed to bring the level into that range. |