Old Motifator threads are available in the Archive.
Limitless
Total Posts: 4
Joined 09-07-2015 status: Newcomer |
Hi, I’m new here and I’ve just bought a MOXF6. I’m not very tech savvy person, so apologize if this questions sounds like dumb questions. My main intention of using MOXF if to get the motif quality sound for creating backing tracks as accompaniment during live performance. I play piano, so I thought I’ll make pad/string/brass tracks using my MOXF, recorded via my DAW. I use Presonus Studio One as my DAW. So I’ve been able to connect my MOXF to PC via USB, and able to record audio signal via built in MOXF soundcard. The thing with recording audio signal is, when I need to change pitch, I’ll need to rerecord all the sound again from scratch. Now, is it possible if I want to treat my MOXF as a VST, so I will record MIDI data, which will be played through the MOXF. Then if I need to change the pitch, I can just transpose the MIDI and bounce the midi data using the MOXF sound. Another question, if I record audio directly using MOXF soundcard, when recording mono channel (L) instrument, do I need to unplug the “(R) Right” audio output cable? Because in my understanding, there are sound difference when you connect only (L) audio output and listen to 1 piece of speaker VS if you plug L&R;cable, but only listen to 1 piece of speaker (the L speaker). I hope you can understand my question. Sorry if it’s confusing and pardon my English. I really appreciate you time to help me. Best Regards. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
See:
http://www.motifator.com/index.php/support/view/moxf_vst3_editor_with_presonus_studio_one
Â
Presuming I properly understand your question…
|
Limitless
Total Posts: 4
Joined 09-07-2015 status: Newcomer |
Thank you 5pinDIN! I’ll try that out! So, in order to use MOXF as VST, I only need to install: MOXF6/MOXF8 Editor Standalone / VST V1.6.3 for Windows (beside the Yamaha Steinberg USB Driver V1.9.5 for Windows) Am I correct? And I don’t need to install this one: MOXF6/MOXF8 Remote Tools V1.0.1 for Windows Do I? Thank you very much for your willingness to help me, I really appreciate your time:) |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome.
Â
Yes, if those are correct for your computer OS.
Â
Remote Tools includes the Remote Editor, but it’s not required if you don’t need to remotely control a DAW. You can operate the DAW from your computer. |
Limitless
Total Posts: 4
Joined 09-07-2015 status: Newcomer |
Hi 5pinDIN. I have tried this guide: http://www.motifator.com/index.php/support/view/moxf_vst3_editor_with_presonus_studio_one I have followed step 1-4 (Picture 1) However, on step 5 (Picture 2), I couldn’t get the VST to be “Online”. It always says “Offline”. When I click it, it says (picture 3) “Ports have not been properly set” However, when I pressed the keyboard, I can see the incoming midi signal (Picture 4) What do I need to do to get it “Online”? Supposedly, once I’m able to get the VST online, I can make the sound/voice selection right from the VST, instead of manually selecting the voice I want manually from the MOXF keyboard, am I correct on assuming this? Image Attachments
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Be sure that the MOXF is turned on and connected before running the Editor. Each time you newly start the Editor, it’s normal to show ”â– OFFLINE” (or block color other than red, but not black). If the block is black ("â– OFFLINE"), it indicates a lack of communication between the MOXF and computer. Under the Editor “File” menu is “Setup...”. Click on that and see if you can set the ports. See pages 37-40 of the Editor Manual. For now, I suggest that the Auto Sync direction for Global and Current be changed to MOXF6/MOXF8 > PC. If you can’t properly set the ports, I suggest that before running the Editor as VST, you try it standalone. Also, you might try a different USB cable - a member recently had problems that were resolved by changing that. Once the MOXF and computer are synchronized, bi-directional control is possible. |
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
Hi there
In your screenshot it says ‘Not Assigned’ for all your ports.
Attaching my own ones, should work for you too, I’d imagine. Good luck Image Attachments
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The port assignments in your attachment are indeed the ones that should be set. That’s why I referred to the “Setup” menu and the relevant Editor Manual pages. It’s also important to click “OK” after that’s done - just closing the Setup window by clicking the “X” won’t write the changes to the program. |
Limitless
Total Posts: 4
Joined 09-07-2015 status: Newcomer |
Thank you zpink and 5pinDIN for the reply, I’ll try copying zpink setting and will let you know if it works! |