Old Motifator threads are available in the Archive.
joden1
Total Posts: 52
Joined 07-26-2015 status: Experienced |
From what I understand (and I probably have it wrong) if I copy a performance to a Song (or pattern), then associate that song with a MASTER, then the performance will still play all four parts AND I can play extra sounds assigned to a different zone…
so does (for eg) Zone 1 assigned to midi channel 1 play all the perf parts, and then if I set say a piano part to zone 2, but assigned to midi channel 2 does it then allow me to play that sound as well as the performance which is ticking away on channel 2? This is all doing my head in something fierce! |
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
Once you get the PERFORMANCE to a SONG or PATTERN MIXING, you can associate that SONG(PATTERN) with a MASTER location. Important to remember that at that point the PERFORMANCE really no longer exists...you now have a collection of MIXING PARTS. In SONG or PATTERN MODE, you must be on a common MIDI channel (Receive Channel) to play PARTS simultaneously. In MASTER MODE, you can simultaneously play up to (4) MIDI channels at the same time (8 in the Motif XF). This is done by activating up to (4) ZONES. However, you can have more than 1 PART assigned to each ZONE MIDI channel...that is how you play multiple PARTS together using MASTER Mode. Must reading: This Article. |
joden1
Total Posts: 52
Joined 07-26-2015 status: Experienced |
thanks but I am still in the dark on exactly HOW I can have a performance AND extra playing parts in a Master??? Does the four parts of the performance go to Zone 1, then I can use zone 2,3,4 for other instruments? Does the Performance need to take up all four zones??? |
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
Since you are limited to (4) ZONES on the MOXF, it seems a good strategy would be to assign the (4) PARTS that originated from your PERFORMANCE to ZONE 1, MIDI channel 1. You then might have (for example):
PARTS 5/6: Piano and Strings: ZONE 2, MIDI channel 2
You would need to get a good “mix” balance on ZONE 1 with your “PERFORMANCE” PARTS (because they will respond together...as a group...when adjusted in real time playing). (Same idea with the Piano/Strings Layer in ZONE 2) You would then retain individual control over your other PARTS: Piano/Strings layer...ZONE 2, Sax...ZONE 3, and Organ...ZONE 4. |
joden1
Total Posts: 52
Joined 07-26-2015 status: Experienced |
okay thanks cmayhle - then at least I am thinking along the correct lines..just need to learn how to do it. Cheers |
cmayhle
Total Posts: 3116
Joined 10-05-2011 status: Guru |
Have you gone through the Article I linked to above? |
joden1
Total Posts: 52
Joined 07-26-2015 status: Experienced |
yeah I had a read over it yesterday - but didn’t “study” it if you get me. Now I know that my thinking is straight I will re-read it more closely. |