Old Motifator threads are available in the Archive.
szfjozsef
Total Posts: 4
Joined 05-03-2015 status: Newcomer |
Just purchased the MOXF6 and installed Cubase 8AI.
But things aren’t working as expected. I select a midi track and I have to set channel to a number (instead of “Any") to be able to select an actual voice from MOXF, instead of a GM voice. Ok, but when I select the second track track and set it to CH 2, select another MOXF voice, track 2 does not play, it’s muted.
I understand that I have only one MOXF device. But with GM voices I can select any instrument for a track from 0 to 127 and those voices are playing fine with the MOXF. So the synth figures out which instrument to play according to the track settings. But when I want to use the actual MOXF voices, this does not work anymore.
I don’t want to play music on the actual device, I would like to create the patterns/songs in Cubase. Can somebody help me configuring the device and Cubase to be able to create multitrack songs as it’s done with multiple VST instruments?
|
philwoodmusic
Total Posts: 1055
Joined 07-01-2013 status: Guru |
Hi szfjozsef, Welcome to the forums. Which mode on your MOXF are using when doing all of this? |
szfjozsef
Total Posts: 4
Joined 05-03-2015 status: Newcomer |
Thank you!
It’s in voice mode. Also the DAW toggle has no effect on voice playing. |
philwoodmusic
Total Posts: 1055
Joined 07-01-2013 status: Guru |
Voice mode is a one part only mode, so it will let you play one voice only. What you need to do, is use a multi timbral mode, which is either SONG or PATTERN mode. Song Mode may look like the place where you work with the onboard sequencer on your MOXF, and it is, but it is also a multi timbral state. Multi timbral means to produce two or more parts at the same time You get 16 parts (the 16 tracks) and they correspond directly to MIDI channels 1 to 16 and with tracks assigned to them on Cubase. |
szfjozsef
Total Posts: 4
Joined 05-03-2015 status: Newcomer |
Thank you very much!
That is the correct answer!
Great! :-) |