Old Motifator threads are available in the Archive.
johnbz
Total Posts: 2
Joined 07-14-2014 status: Newcomer |
Hi, So...I’ve now read through everything I could locate regarding how to set up the MOXF8 to run an external synth, but I still have a problem with notes getting stuck. If I play an external synth from an old M-Audio keyboard controller, the synth (which is playing a unison monophonic patch) plays absolutely fine. When I try to play the same thing from my MOXF8, the first 2 or 3 notes are fine, but after that the notes do not following what I’m playing correctly, and then the external box gets notes stuck on. Also, it will be the case that the synth ignores any more note-on events after that. Any ideas?
Thanks,
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum. Please describe exactly how the external synth and the MOXF are connected (MIDI In/Out), and any other MIDI-related gear (computer, etc.) and how it’s connected (DIN, USB). |
johnbz
Total Posts: 2
Joined 07-14-2014 status: Newcomer |
I’m using a single MIDI cable from the MOXF8 MIDI Out to the external synth MIDI In. No other connections are involved (except audio output, of course). No USB involved; no computer. No sustain foot switches plugged in. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
There are a few possible causes of what you’re experiencing. Just to verify that the MIDI cable is OK, and that the MOXF MIDI-Out is working as it should…
If the above doesn’t work, try another cable. If it still doesn’t work, the MIDI-Out port might have problems.
If the above does work…
|