Old Motifator threads are available in the Archive.
acoustimax
Total Posts: 10
Joined 04-08-2015 status: Newcomer |
I am trying to get my MOX working with Cubase. I have Win7/64 and Cubase 6/64bit I see the current USB driver is 1.9.2 but read on another forum the MOX will not work with anything above USB 1.6.1 is this correct? On the Yamaha Site they have USB 1.9.3 and USB V 1.7.3(32 bit) and USB V1.7.3(64 bit) so is USB 1.9.3 both 32bit and 64bit? In Windows/Control Panel/Programmes I have 2 Yamaha Drivers showing...Yamaha Steinberg USB Driver (v 1.6.1) and I also have Yamaha USB-MIDI driver (v 3.1.3.1) why do I have 2? I do have my 01v96 connected by USB, is that why I have 2 USB drivers showing? |
bgrosse
Total Posts: 465
Joined 07-06-2009 status: Enthusiast |
I am using driver USB V 1.7.3 (32) & (64)with my MOX no problems. |
acoustimax
Total Posts: 10
Joined 04-08-2015 status: Newcomer |
So you’re using both 32bit and 64bit, how does that work out? what’s the point in having both? |
bgrosse
Total Posts: 465
Joined 07-06-2009 status: Enthusiast |
I have been using Cubase for a very long time and have work done in 32 bit long before 64 bit was offered for Cubase. |
acoustimax
Total Posts: 10
Joined 04-08-2015 status: Newcomer |
So you’re NOT using 32bit now? |
Lee Batchelor
Total Posts: 486
Joined 12-16-2003 status: Enthusiast |
Hi Acoustimax, I’m using the Yamaha Steinberg USB Driver 1.9.2 with my MOX8, Cubase 8, Windows 7 Pro, 64-bit. No problems, except Cubase 8 freezes once in a while. I’m still waiting for Steinberg to address this, as are hundreds of others, I’m sure. I have another driver. It’s the Yamaha USB-MIDI Driver (WDM). This one works for my Tyros 5. Do have another keyboard? - Lee |
bgrosse
Total Posts: 465
Joined 07-06-2009 status: Enthusiast |
I have Cubase V7.5 (32 bit) and Cubase V7.5 (64 bit) both installed as separate programs on my PC and use both with my MOX6 no problems. |
acoustimax
Total Posts: 10
Joined 04-08-2015 status: Newcomer |
I decided to go with the 1.9.2 driver and have now got the remote and VST editor software working, but weird things happen. For example I play a note, the Cubase Drum Editor opens, I play another note and Cubase Media Bay opens!!!
I put the MOX in what I understand to be multi-timbral mode - Song or Pattern.
I stop Cubase, the Motif Sequencer stops, then after a few moments, to starts up again all of it’s own - this MOX is getting on my box, am thinking of going back to my Triton Extreme, glad I decided not to sell it yet |
Lee Batchelor
Total Posts: 486
Joined 12-16-2003 status: Enthusiast |
I had the exact same thing happen! I would play a few notes on my MOX8, and all sorts of windows and dialog boxes started opening in Cubase. I fixed it, but I can’t remember exactly how. I’m almost positive it had something to do with my VST connections or improper signal routing. Perhaps someone can chime in on this. Going back to the Triton is not necessary. Can someone kick in some ideas here? |
bgrosse
Total Posts: 465
Joined 07-06-2009 status: Enthusiast |
Sounds to me you are attempting to use the Re mote Editor and not the VST Editor. Just a guess. |
acoustimax
Total Posts: 10
Joined 04-08-2015 status: Newcomer |
I opened the Remote Editor, couldn’t make any sense of it, so closed it, then opened the VST editor, when I selected a new instrument in VST editor, it changed in the editor, but the sound displayed and sounding on the MOX didn’t change. But I pressed a key on the MOX keyboard and the drum editor opened!!!! |
Lee Batchelor
Total Posts: 486
Joined 12-16-2003 status: Enthusiast |
Can you post screen shots of your VST Connections and Track Editor settings? Describe your signal routing and what sound interface you’re using. Give all details no matter if you think they aren’t important. As mentioned, I had the same problem but fixed it somehow. After I see how things are connected, I can compare your connections to mine. I’m using the MOX8 with the Editor VST. I went through this with Cubase 8, and with Bill Grosse’s help, I was able to figure out where things were configured wrong. (I thought I would drive the poor man nuts--Thanks again Bill!). - Lee |
bgrosse
Total Posts: 465
Joined 07-06-2009 status: Enthusiast |
I am assuming you are selecting “Voice” Mode on the MOX when using the VST Editor in Voice mode. Each time you activate the editor in Cubase, it should load either the current voice and it’s data from the MOX or send the current voice and it’s data in the editor to the MOX, depending on the setup you have set in the editor. I’d send you a pic of my editor setup, but when I click on the cutout, the window disappears. Seems there is a picture of the proper settings in the Editor manual. |
bgrosse
Total Posts: 465
Joined 07-06-2009 status: Enthusiast |
The best thing I can recommend for getting your MOX/Cubase to working together is the article by Phil Clendeninn found at the following link.
http://www.motifator.com/index.php/support/view/mox6_mox8_cubase_and_the_editor_vst Bill G |