Old Motifator threads are available in the Archive.
SMOXF
Total Posts: 5
Joined 07-13-2014 status: Newcomer |
Hello! I have a problem with my moxf ((((
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Please describe the exact procedure you used. Which buttons did you press, etc. |
SMOXF
Total Posts: 5
Joined 07-13-2014 status: Newcomer |
Utility - (SF6) Other - Power on mode - User 1 |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
OK, that’s the correct procedure to default to User Voice Bank 1 when the MOXF’s power is turned off and back on. I haven’t seen reports of problems such as you’ve described here on Motifator. Do you know which version of the OS is installed in your MOXF? |
SMOXF
Total Posts: 5
Joined 07-13-2014 status: Newcomer |
I don’t know which version OS, I bought synth a week ago, and it’s verу glitch...(((
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
If it’s very glitchy, it wouldn’t surprise me if there’s an old version of the OS installed. You might want to try to update it.
MOXF6/MOXF8 V1.03 Operating System Updater:
Be sure to follow the directions. |
SMOXF
Total Posts: 5
Joined 07-13-2014 status: Newcomer |
Thanx! |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome - I hope it helps. |
wunno
Total Posts: 7
Joined 06-14-2014 status: Newcomer |
I had a similar issue, all buttons dead no LED was on and now sound at all. But the display showed the current voice. I had to bring it to a Service Center. They had to clean some contacts inside and now it works fine again.
|
SMOXF
Total Posts: 5
Joined 07-13-2014 status: Newcomer |
Wow! Please, tell me your serial number |
wunno
Total Posts: 7
Joined 06-14-2014 status: Newcomer |
Here’s my serial number: EBT081150 |