Old Motifator threads are available in the Archive.
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Thanks for the update. You’re very welcome - I’m glad that the Test Mode procedure was able to fix the problem. Hopefully Melas can determine what went wrong and can update his software to prevent it from happening again. |
jenny13857
Total Posts: 1
Joined 03-03-2021 status: Newcomer |
Did you tried doing it again? |
sdaino
Total Posts: 4
Joined 02-09-2005 status: Newcomer |
Follow up: I had contacted John Melas who very kindly checked the offending waveform. The problem was that this waveform contains 501 keybanks (it is a Rhodes Mark I sampled each key on several layers), which exceeds the 255 keybanks per waveform allowed on the Motif XF. He is preparing a new version of Motif Waveform Editor adding a warning when you try to put more than 256 Keybanks in a Waveform. Again, thank you very much to 5pinDIN for his suggestion, and John Melas for his prompt reply and support. His editor is a great tool. It is really very easy and very effective to use.
Stefano Daino
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Again, you’re welcome. It’s good that the problem is being addressed, although I’m a bit surprised that it wasn’t prevented right from the beginning. For example, my Arps-Plus program warns against and prevents exceeding 256 Arps in .X0G or .X3G files it creates by joining two files. See attachment. Image Attachments
|