Old Motifator threads are available in the Archive.
HirenP
Total Posts: 6
Joined 10-11-2020 status: Newcomer |
Hi,
After Pressing,
Note:
Please advise Thanks, |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum. The XS8 comes with an mLAN16E2 interface as standard. To use with the Yamaha Steinberg FW Driver, the mLAN16E2 firmware has to be updated, currently to version 1.07. Have you done that?
If not, the IEEE1394 Firmware Updater can be downloaded here:
|
HirenP
Total Posts: 6
Joined 10-11-2020 status: Newcomer |
Thanks for the reply,
1) I have installed ‘’Yamaha Steinberg FW Driver V1.7.5
2) As you said, I also downloaded and installed ‘’IEEE1394 Firmware Updater ‘’ (Version: 1.08)
Please let me know if you can judge-out any further. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I did not say to update the firmware to version 1.08. That version is required when an mLAN16E2 is used in a Motif XF, but not for the XS. Did you turn off the XS and reboot it after running the IEEE1394 updater? That’s necessary for the “FW” option to appear. Based on the version of the YSFW Driver you installed, you apparently have a Mac. You might try uninstalling that driver, then reinstalling it and see if recognition occurs. |
HirenP
Total Posts: 6
Joined 10-11-2020 status: Newcomer |
Hi, Sorry for the late reply,
Thanks |
HirenP
Total Posts: 6
Joined 10-11-2020 status: Newcomer |
Hey,
................. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I suggest that you check again to see if the IEEE1394 Driver setting on the XS can be changed to “FW”. If not, then it would probably be best to contact Yamaha Support in your country and see if they can be of assistance. |
HirenP
Total Posts: 6
Joined 10-11-2020 status: Newcomer |
At the beginning I said that it not changing to FW |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
At the beginning you hadn’t updated the mLAN16E2 firmware. I’m done with this topic. |