Old Motifator threads are available in the Archive.
Mr.20c
Total Posts: 13
Joined 02-21-2019 status: Regular |
Mox8
What am I doing wrong.
I played in a band 25 years ago, had 2 oberhiems...sorry I ever got rid of them and am thinking of moving on to the montage 8 . This mox8 is not user friendly,,,,,,,. Don’t get me wrong I love the sound quality, options but I am little lost,,,,.Probably me ....but I really could use a little help .
|
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
You may need to switch on ‘Parameter with voice’.
Hopefully it’s similar on the MOX. |
Mr.20c
Total Posts: 13
Joined 02-21-2019 status: Regular |
I’ll check that out, thank you very much for your help,
|
Mr.20c
Total Posts: 13
Joined 02-21-2019 status: Regular |
Well,,,,,,
A.Func1 Latch
GENERAL/ MFX/ MEQ/USB I/O/ A/DIN/ EFFECT
Any suggestions would be appreciated.
|
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
I won’t be near my MoXF for a couple of days, sorry.
Side note, it has been discussed and some complaints why it defaults to not copying arps with voice, I personally think it makes sense as it is. It’s likely that an ARP is part of your song but you want a slightly different piano or whatever…
EDIT, you shouldn’t press Edit as I remember, after Mixing, just press the ‘Voice’ tab. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
From the support article I previously suggested (in another thread),
Now move up and select your Voice, by BANK and NUMBER… You omitted the step in bold font. At that step one of the Parts is selected by pressing a button, [1]~[16]. Press the numbered button corresponding to the Part you want to edit. Also see Mixing Part Edit, beginning on page 117 of the MOX Reference Manual. Note “Operation” near the top of the page.
Â
I hope that helps. |
Mr.20c
Total Posts: 13
Joined 02-21-2019 status: Regular |
Ok,
Just want to check something, no doubt it’s what I am doing.....🥴 If you go to voice, choose pre7:060(12) It’s under musical effects. Play any matching C , hit arpegiator to turn it on...works fine, there is a repeat in this sound when activated. As soon as I go into song/mixing turn on pre with voice , hit arp button, it does nothing.,,,,
I appreciate your help...ðŸ‘
|
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
From the above, I wonder if this is one thing the MOX and MoXF differ in.
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Three possibilities come to mind… 1) There are two ARP buttons on the MOX, ON/OFF and EDIT. When in a mode having multiple Parts (Performance, Song, Pattern) the ON/OFF button controls the Arps for all the Parts that have an Arp activated. To activate, there’s an Arp Switch for each Part - it’s accessed from Song mode by pressing the ARP [EDIT] button, then [F3] MAIN - turn that Switch Parameter “on” for the selected Part. See Arpeggio Edit beginning on page 82 of the MOX Reference Manual, [F3] MAIN on page 83, with the details referred to on page 27. If the Arp Switch setting doesn’t resolve things, then… 2) As mentioned in the support article, Parameter with Voice has to be turned on before the Voice is selected for the Part. If you’ve selected the Voice first, turn Parameter with Voice on, temporarily select a different Voice, then reselect the one you want. 3) The default Arp number in the Mixing isn’t necessarily the one defaulted to in the Voice. Make sure you select the same Arp number in the Mixing that’s active in Voice mode. |
Mr.20c
Total Posts: 13
Joined 02-21-2019 status: Regular |
Thank you 5DIN,ðŸ‘
|