Old Motifator threads are available in the Archive.
Giovanni71
Total Posts: 2
Joined 03-27-2017 status: Newcomer |
Hi, everyone. It’s been two years since I began to follow this forum and I find it very helpful, so thank you in advance, anyway.
I own an MOXF 6 and an Ipad 2 AIR both updated to the latest IOS/firmware avalaible.
Thank you for your patience. |
philwoodmusic
Total Posts: 1055
Joined 07-01-2013 status: Guru |
Hi Giovanni71, Welcome to Motifator. The Yamaha steinberg usb driver is only available for Windows or Mac and you need to use that in order to record USB audio from your MOXF. So, if your version of GarageBand is on mac, or you use another DAW on a computer, then you should be fine. It won’t work on IOS, but MIDI will work, as you’ve found. In terms of your MOXF, USB outputs 3 & 4 are the default outputs on the MOXF for the tone generator (Voice audio). USB outputs 1 & 2 are the default outputs for the A/D inputs. Back up by saving an ALL file onto a thumb drive first, then try a factory reset on your MOXF to ensure your audio is routed as above. Then, if you still don’t get any joy, you at least know it’s something to do with the software settings |
Giovanni71
Total Posts: 2
Joined 03-27-2017 status: Newcomer |
Hi philwoodmusic, nice to meet you: your advice in other posts was very helpful to me. Thank you for the reply: you’ve clarified very well. So the USB audio recording feature works fine on Macbook and so on, due to the Steinberg driver. No driver on IOS, so no audio: right? Thank you again. |
philwoodmusic
Total Posts: 1055
Joined 07-01-2013 status: Guru |
Yes, that’s correct. Thank you and you’re welcome, Giovanni71! |
nbadesign
Total Posts: 994
Joined 08-20-2007 status: Guru |
That’s not correct! One of the main feature of the latest firmware for MOXF is full audio/MIDI compatibility with iOS devices with iOS 9 an higher. There were some problem when Apple have upgraded iOS from version 8 to 9 and I remember that I have lost connection to iPad. After upgrading MOXF to firmware 1.12 I could record both MIDI and audio directly to iPad Air 2. Apps that I’m mainly using are Cubasis, Yamaha Editors and Mobile Sequencer, IK Multimedia SampleTank and lot of other stuff.
Alex |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
To check the MOXF OS version (just to be sure)…
See page 150 of the MOXF Reference Manual.
If needed, MOXF OS v1.12 can be downloaded here:
|
philwoodmusic
Total Posts: 1055
Joined 07-01-2013 status: Guru |
Apologies Giovanni71, I had no idea that it was possible. You learn something new everyday! Many people miss that the tone generator audio defaults to outputs 3 & 4, and that’s pretty much the number one reason why people post that they can’t get USB audio working in any situation. We’ve now mentioned that THREE times in this thread, so that should tell you something. That is usually an initial problem because your DAW or App will commonly set up audio tracks with inputs 1 & 2 by default, but it’s easily fixed by changing them (not your MOXF) to 3 & 4. I will head off and fire some rounds at some baby food and dial in a bit better. |