Old Motifator threads are available in the Archive.
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
Hi! I am working on composing a song. Is it possible to make a clean cut out of a measure and join the cut end to the next measure? For example: I have a phrase (part of a pattern) that starts recording at beat one but I do not play until the second subdivision of beat four in measure 2. Later, I do not want to record the same piece again, but need to modify the timing. I have it in a pattern chain, and the last measure of section B has no notes beyond beat two. Can I take the second beat of the last measure of section b and cut out everything from there to the second subdivision of beat 4 in measure one of section C? And then join the two together for a seamless transition? I would hate to re-record this section, as it was spontaneous, and I cannot necessarily repeat it. Thanks! -Max |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
I will re-phrase the words. Can I cut out three or more extra empty beats from a song and have the two sections transition seamlessly? |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
You can probably use the Shift Clock job to do what you want. 1. Erase the notes you want to get rid off. 2. Set the range to shift as starting at the point you want to splice and running to the end of the song. 3. Set the clock value to the number of beats you removed. Good luck! |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
My XF will not allow me to shift the clock backwards. If I change the first box to measure 25, and the other to 24, they both change to 24. Also, I cannot seem to erase the measure data that I need to. I erased everything except for the notes after beat three, and the empty space is still there! -Max |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
Ok. I need to shift the clock backwards. My notes start on beat three of measure one, and I need to have them start on beat one. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
So do you have this working now or not? |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
It is not working. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
EDIT: I tried this myself on a song of my own, the clock shift did exactly what you wrote you needed, both on single tracks and all tracks. I moved the song forward (to a later measure) using Delay and backwards (to an earlier measure) using Advance. Either you are not setting the parameters correctly or I totally misunderstand your problem. You could also try Copy Events. Select your entire track starting with the first beat you want to copy, then copy it to an empty track starting on whatever measure/beat you like. |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
That will not work. The original Pattern contains the extra two beats. |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
I find the process very confusing. How do I use that job correctly? When I tried your suggestion, I got a whole block of notes played at the same time. Not what I need. :-)
Here it is laid out in basic form. I have a pattern section C. I started playing the notes on beat Three of the first measure. I want those notes to start playing on Beat One of that measure instead. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
I have uploaded two files. One is a all pattern file (.x3p) with pattern #1 MADMO, with a chain programmed. The second is a WAV file recording of that chain playing. The pattern has five 2 bar sections, (A through E). Section A has one bar of drums followed by one bar of piano plus drums. Each section following used Shift Clock Advance of a single best of the piano part only (the odd numbered phrases...001, 003, 005, etc.) and you can hear it move against the drums. The final section (E) has moved the piano by four beats so you hear one bar of piano plus drums followed by one bar of drums only. Look into the patterns using Edit to check the timing (everything was quantized to fall on 1/4 note boundaries). Is this the sort of thing you are trying to do?
This exact process is what I used for my example MAXMO: 1. Copy section C to another section as a backup, P (last) is good 2. Figure out what the phrase number is. You do this by selecting section C and then select Patch. This will show your phrase numbers for each part in the mixing (unused parts will show --). See p.170 in the ref manual. 3. Select Job 4. Select Event 5. Select Shift Clock 6. Enter your phrase number 7. Enter the location of the first note (bar, beat, clock) which should be 001:03:000 in your case. 8. Enter the end of the pattern (easiest to just scroll all the way to bar 999) 9. Enter the new starting position...001:01:000 10. Hit Enter to save the edit 11. Press Pattern and play section C, if it’s OK you are done...press Store. If not, go back into Job, select Undo and start over. |
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
I end up with all of the notes in the first measure being mushed with the first two notes in the second measure. It happens every time. -Max |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
Post an All or All Patterns file and I’ll take a look at it. |