Old Motifator threads are available in the Archive.
vitamusic
Total Posts: 31
Joined 07-25-2016 status: Regular |
Hello,
initial info :
I have difficulties to configure my staff to be able simultaneously use motif for
Could you explain me step by step instruction on how to configure
I need the following vsti use cases :
1. record/play/render stereo/mono track (like I do it with a soft vsti)
2. when motifxs drums recording
3. use the motifxs effects (reverb, delay, compressor,...) as insert/send in a cubase project on other than motifxs tracks, for example the track recorded with some soft vsti of cubase ? 4. when I did all necessary configurations of motifxs for a cubase project (audioin, motifxs as vsti, drums, lanes, fx,...), could this configuration be saved within the project? how?
Sorry for many questions at once. I’d like to have a clear and comprehensive instruction for the essential use of motifxs inside cubase.
Thank you for your help in advance!
Kind regards,
P.S.--------------
perhaps it is not possible but if one could share the cubase templates with all necessary configuration between motifxs et cubase 6.5 for the cases
one more question is there difference between cubase 8 and 6.5 from the motifxs functional point of view /to avoid the surprises in the case of upgrade/ ? |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
You forgot to mention what audio interface you are using. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Based on…
|
vitamusic
Total Posts: 31
Joined 07-25-2016 status: Regular |
yes it is mLAN16E of this model connected by FW, managed by Yamaha FW driver on PC side. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
OK, you have mLAN card configured with FW16e formware. Are you successful getting audio in and out of Cubase in general? That is, Cubase playback comes though the XS into your speakers and you have recorded audio from either the A/D in or the XS itself into Cubase. If you have then I can probably help you with the fine tuning you need to do for simultaneously recording of mic and guitars to cubase while using motif xs sound generator as a vsti. |
vitamusic
Total Posts: 31
Joined 07-25-2016 status: Regular |
yes, I can get and record audio in, and audio out works well too.
I found how to add Motif XS VSTi (F11) and configure it to have at maximum 8 stereo channels (Setup vsti Motifxs Editor). When it is online the configuration is saved automatically in cubase project.
But I did not find the way :
Also the questions on how to record motif patterns directly to Cubase project is not clear for me. |