Old Motifator threads are available in the Archive.
siliconarrow2
Total Posts: 2
Joined 03-30-2015 status: Newcomer |
Hello, I have connected a mike to my XS8 (to one of the A/D Inputs) and now enjoy playing it and signing to it at the same time. What I want to do now is to record all of the above but separate it into the following signals:
- stereo music signal from the MOTIF in Voice or Performance mode (stereo pair, left and right)
Is it even possible? So far, I was only able to record a mixed signal (stereo music + mono voice) coming from the main outs. There are those assignable L and R outs - is it possible to send the voice signal to one of them? Thank in advance! |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
This support article should help:
|
siliconarrow2
Total Posts: 2
Joined 03-30-2015 status: Newcomer |
thank you for this quick reply!
Should I presume that what I was after is possible? Good news…
thanks again. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome! Yes, signal at the A/D INPUT can be routed to either the main or the assignable line outputs (or via FireWire if an FW16E is installed), and how effects are applied is also configurable. |