mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]

Forum Home  >  Instruments  >  Motif-Rack XS  >  Thread

forumforum
Search  
  
  Advanced Search

Old Motifator threads are available in the Archive.

Viewing topic "Signal Routing"

     
Posted on: March 06, 2015 @ 11:58 AM
pblais
Total Posts:  95
Joined  03-05-2015
status: Experienced

Excuse me if this has been asked already.  If it was, I couldn’t find it.

I need to send the audio signal from the rack to two different places.

Is it possible to set the two “assignable” jacks to have exactly the same signal that is on the normal output jacks?
If yes, could someone explain how it is done.  I can’t see anyplace in the owner’s manual how to do that.

Thank you in advance
Pierre

  [ Ignore ]  

Posted on: March 06, 2015 @ 01:29 PM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend
pblais - 06 March 2015 11:58 AM

[...]Is it possible to set the two “assignable” jacks to have exactly the same signal that is on the normal output jacks?[...]

Short answer…
It depends, but usually “no”.

Longer answer…
See page 12 of the Rack XS Owner’s Manual, ASSIGNABLE OUTPUT L AND R jacks for what can be assigned.

See this thread for information on effects:
http://www.motifator.com/index.php/forum/viewthread/451980/

  [ Ignore ]  

Posted on: March 06, 2015 @ 02:24 PM
pblais
Total Posts:  95
Joined  03-05-2015
status: Experienced

Thank you for the help… I will look in to it as you suggested

  [ Ignore ]  

Posted on: March 06, 2015 @ 05:19 PM
pblais
Total Posts:  95
Joined  03-05-2015
status: Experienced

Thanks for the help…
I was just looking at the owner’s manual…
Could I route my signal to two different places by using the normal output jacks on the back and the headphone jack on the front?

  [ Ignore ]  

Posted on: March 06, 2015 @ 06:56 PM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend
pblais - 06 March 2015 05:19 PM

Thanks for the help…

You’re welcome.

 

pblais -

I was just looking at the owner’s manual…
Could I route my signal to two different places by using the normal output jacks on the back and the headphone jack on the front?

With the proper cabling, yes.

  [ Ignore ]  

Posted on: March 07, 2015 @ 12:43 AM
pblais
Total Posts:  95
Joined  03-05-2015
status: Experienced
5pinDIN - 06 March 2015 06:56 PM

With the proper cabling, yes.

Anything special needed?

  [ Ignore ]  

Posted on: March 07, 2015 @ 11:02 AM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend
pblais - 07 March 2015 12:43 AM
5pinDIN - 06 March 2015 06:56 PM

With the proper cabling, yes.

Anything special needed?

Just something to adapt the TRS headphone output to 2 separate L and R TS.

  [ Ignore ]  


 
     

Previous Topic:

‹‹ Cubase AI or full version? Next Topic:

    Is this normal? ››