Old Motifator threads are available in the Archive.
MarkJohnson
Total Posts: 75
Joined 09-03-2013 status: Experienced |
I have a second keyboard with its MIDI Out connected to the MOXF’s MIDI In. The MOXF is connected to my laptop via USB interface. I can play a soft synth on my laptop from the MOXF keyboard; however, I can’t figure out how to assign the second keyboard to make that connection. I’ve assigned the second keyboard a MIDI transmit channel on 2 and the soft synth has been set to receive on channel 2. That doesn’t work. I’m sure I’m missing something very obvious, but I’m at the end of my thought process here. Thanks in advance. Mark |
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
I think you need to use THROUGH rather than IN on the MOXF.
Sorry, forget that, had a blonde moment!
|
MarkJohnson
Total Posts: 75
Joined 09-03-2013 status: Experienced |
Yeah, it’s got to be some MIDI routing assignment in the MOXF, I just can’t figure where that would be. I’m hoping it will be patch-independent, meaning I don’t have to use a specific Performance or Master assignment. I essentially want to dedicate the second keyboard to the soft synth using the MOXF’s USB connection regardless of what patch I have the MOXF on. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
See MIDI channels and MIDI ports on page 54 of the MOXF Owner’s Manual. Specifically read the Port 3 section. If you can configure the soft synth to use the MOXF’s Port 3 for MIDI input, that should accomplish what you’re asking about. (The software’s MIDI-In might show something like “Yamaha MOXF6/MOXF8-3” as one of the choices.) |
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
Page 51 in Owner’s Manual:
“NOTE Any one of these interfaces can be used for MIDI data
Sorry dude, you may be flogging a dead horse here.... Just read the post 5PinDIN had made, hopefully he’s right and I’m wrong then. ;-) |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
As long as MarkJohnson configures the soft synth’s MIDI-In to use the correct MOXF port, it should work.
|
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
Hopefully you’re right! I’ve had no reason to try this myself and interpreted the “Any one of these interfaces can be used” and “However, they cannot be used at the same time.”, as if the MOXF itself only dealt with one of them at any given time. I have the a Novation resting vertically next to me due to lack of space, I may have to make some room just for testing purposes here. LOL PS. Living in UK, hence the double quotes for quotes. ;-) |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
When MIDI IN/OUT is set to USB, the 5-pin DIN connections function as described under PORT 3 on the manual page I previously referred to. Really!
Â
By all means… Â :-) |
MarkJohnson
Total Posts: 75
Joined 09-03-2013 status: Experienced |
Wow, 5pinDIN you nailed it. zpink, I get the big D’OH award here. When am I going to RTFM?! Thanks all!!! Mark |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I’m glad that you got things working as you wanted. Nobody should be going “D’OH!”. While reading the manuals is often helpful, sometimes the information isn’t easy to find or explained clearly. Besides, how else would I get a high post count? Â ;-) |