Old Motifator threads are available in the Archive.
autowah
Total Posts: 9
Joined 06-28-2014 status: Newcomer |
http://www.thomann.de/se/yamaha_motif_xf_6.htm
With the one that Thomann sells it should be the following:
But can this differ? I bought a XF6 2nd hand but it only has 512 flash and I didn’t get any USB. Should there have been a USB aswell? And another thing. I updated the OS and when I boot up I get the message: New flash memory module. Please load waveform data. How do I go about to get the waveform list back? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’ve asked these questions as if they’re related, but that isn’t necessarily the case. Yes, there were different versions of the 10th Anniversary Pack. Some came with a 512 MB module, some with the 1024 MB (1 GB). As to what you get with a used product, that could obviously vary significantly. The XF didn’t initially include any optional flash modules, USB flash drive, etc. You might have recourse, if the seller made specific claims about what was included.
Â
From the OS Readme file:
After you’ve completed the update and reboot the MOTIF XF, the message “New Flash Memory Module, Please load waveform data” will be displayed. Load the backup data (the message disappears).
If you didn’t have a USB drive in order to do the above, then you probably shouldn’t have installed the update at that time. |
autowah
Total Posts: 9
Joined 06-28-2014 status: Newcomer |
Ok, so the USB I probably can forget about then. Is there any way that I can get those sounds/waveforms? One thing that puzzles me is that when I look at Utility->Flash it says free size 328MB, so there should be something there or? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
These might interest you…
Inspiration in a Flash:
CP1 Piano:
Twisted Tools Selection:
EDM_Expansion:
32 new Voices and 8 Performances that use new effects in OS V1.50:
http://www.motifator.com/index.php/support/view/flash_board_session
Yes, there’s something there, but unless an “All” file was first saved, and then reloaded after the OS update, the Waveform list isn’t populated.
This thread has relevant information:
|