Old Motifator threads are available in the Archive.
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
After you delete the duplicates, are you repointing the Voices in the Patterns to the proper (remaining) Waveforms before saving? I’m not familiar with the error code you’re getting, but it just might be caused by the ES seeing Voices that point to nonexistent Waveforms.
Â
Actually, the maximum for the ES is 2 of 512MB (the manual is wrong). However, you didn’t answer my question. This only matters if you’re running out of memory - are you?
Â
Try to avoid saving and loading duplicate Waveforms - yes, the time to do so will increase otherwise. Using “All” files that don’t themselves have duplicates can help. |
ENOO
Total Posts: 144
Joined 07-05-2008 status: Pro |
Since i had info that the MAX is 512 MB TOTAL, i have 2 X 256. Have like 10 voices from the 3rd party library, 6 songs that use few of them & like 8 Patterns that have user voices too. (1) So do i have to always point waveforms to loaded user voices whether SONGS/PATTERNS always so that they do not duplicate ? Will get back to you soon as I see results (hope so)
(2) MEMORY installed is 2 X 256 bcoz that’s what i was told/read in the MANUAL.
Currently it shows 46.8 MB used
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
If that’s all you’re typically using (that’s why I asked!), then it seems you’re likely overly concerned. Are you having an actual problem? |
ENOO
Total Posts: 144
Joined 07-05-2008 status: Pro |
Sorry the info that i gave u on sample mem was incorrect. 46.8 was only with the ALL VOICE. After doing a LOAD ALL it shows 93.3 sample mem used, like twice the amount. is that due to duplication of waveforms ? At this point I am just trying to learn/grasp & get my hands on it. Will be sampling quite much more. These Indian/Bollywood waveforms/voices are anywhere like 2 to 7 MB each. (1)after deleting the duplicated waveforms (having the one only per waveform that i should have to begin with) point them to the tracks of the user voices on my patterns/songs & this will prevent duplication ? (2) To load an ALL from the flash dr it takes just a l’il over 5 min. is that normal ?
(3) with a factory reset, I load the 10 user voices/waveforms, i see the 10 (which is how it should be, correct ?) BUT as soon as I load the PATTERNS, SONGS or say like the ALL File I see exactly the same repeat from 11 thru 20 ? & when I delete the 11 thru 20 & try to save an ALL file it reads -45999 UNKNOWN ERROR.
|
ENOO
Total Posts: 144
Joined 07-05-2008 status: Pro |
Please MBF or 5SD,
then When I load the PATTERN that has these 10 USER VOICES in the MIX the duplication takes place, like i mentioned earlier 1 thru 10 repeats 11 thru 20 & if I delete any then i get that -45999 unknown error & it’s all messed up on my ALL file, etc.
Is it that bcoz the PATTERN has these 10 user voices that it is actually loading the waveforms again rather than using those 1 thru 10.
|
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
In your patterns are you using Mix Voices? After selecting a pattern in the Mixing screen you can select each track and see what voice is being used. If more waveforms are being loaded when you add the Pattern, then those waveforms were saved with the Pattern...normal if any of the patterns are using mix voices that use samples. You still have not told us the source of these files you are trying to load. It would help us a lot if you would just tell us, you keep telling us the same thing over and over again. If that was all we needed to know we would have been able to explain to you what to do already. Here is something to try:
1. Turn on the ES
Let us know how that works out. |
ENOO
Total Posts: 144
Joined 07-05-2008 status: Pro |
The following is all that you requested, pls respond for resolve, appreciate it, thanq. (1)Clarify Mix Voices ? u mean like the USER VOICES from the Library ? (2) The SOURCE that i am loading these user voices from is called Swar Systems that specializes in Indian instrumental sounds, etc. (3)Just loaded ONLY the PATTERNS. The PATTERN plays with all the normal voices/drums, etc (preset from MOTIF ES) BUT.....NO I do not hear the user voices (loaded from SWAR) (4) the sample memory used is 312 kb versus when i load ALL it is 90 + MB. (5) most important NO WAVEFORMS in the RAM
Hope I am expressing myself right so that i can help u for u to help me.
|
ENOO
Total Posts: 144
Joined 07-05-2008 status: Pro |
Buddies NO response as of yet ? Well here’s an update 4u: I deleted the 1 thru 10 & succeeded with just having 11 thru 20 on the waveforms. Now the sample memory has reduced to half & so has the time in loading the flash.
So tell me now.
|
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
The location of the waveforms does not matter. If when loading only the voices you see only 10 waveforms in RAM and after loading the patterns as you have 10 more waveforms you did something wrong. Why? Because when you loaded only the patterns you got no waveforms! The only way we can really tell you what you did is by coming to your house and watching you do the loads. You need to be very careful about the files you load and the order you load them. What you really want is to set the ES up exactly as you want it (user voices, sequences, waveforms) and then save an All file and always load that (read the manual section about Autoload, which will load the file for you every time you turn the ES on). Loading voice, patterns and songs separately can lead to data being duplicated or overwritten so the best advice is if you are not really sure about how file loads work just stay with All files. Don’t forget to back your All files up to your computer’s hard drive and date them so you can always recover anything that you might lose by accident. Your question: Mix Voices and not the same as User Voices. A Mix Voice is associated with a sequence (Song or Pattern). This allows you to save voices with your sequences so that when you reload them, the proper voices are in the sequence not in the user voices. For example, if you create a song today and want to reload it to a different ES (which will not have the same user voices loaded as yours) or perhaps you loaded different user voices, the song will still play properly. You can read more about using Mix Voices in the manual (check the index). I’m familiar with Swar, they are a reputable vendor. Did Swar provide text instructions about how to load the files? If they did, you could post them here and maybe we could decipher further why you had such an issue with the loads. |
ENOO
Total Posts: 144
Joined 07-05-2008 status: Pro |
OK.....Believe most probably somewhere down the line I loaded those user voices twice, maybe ? On SWAR: they provided me with a .w7v & W8V for each instrument. I loaded them on a Flash dr thru which i loaded them on (user voices) in the motif es. Now here’s something (maybe that caused it/not sure) say like the TABLA which has a left & a right, i noticed that when I loaded a patch from their library (.mid file) it had the left & right in 2 separate phrases in the section. So that i could save a track I mixed both of them to one phrase & it sounds all fine. Is that to do with this mess i went thru ? I will do an AUTOLOAD or always do an ALL, to make sure.
Now out of curiosity & to gain knowledge,
& (2) When I load another user voice will the waveform automatically go to 1 or 21 ? pheeew, relief ! the loading time now is like 1/2 than before.....l’il over 2 min with an ALL (incl 6 SONGS + 10 PATTERNS + 10 user voices/waveforms)+ 1/2 the sample memory :)
Certainly appreciate if you would still shed some of yr expertise on the above queries + is the SWAR stuff all fine ?
|